DIN Vana Standartları

DIN 475-1 : Widths across flats for bolts, screws, valves and fittings

DIN 475-2 : Wrench and socket openings

DIN 477-1 : Gas cylinder valves rated for test pressures up to 300 bar; types, sizes and outlets

DIN 477-4 : Compressed gas cylinder valves; swing check valves for camping-cylinders

DIN 477-5 : Gas cylinder valves – Part 5: For test pressure up to 450 bar max.; Outlet connections

DIN 477-6 : Gas cylinder valves; test pressures 300 bar and 450 bar, with cylindrical thread for valve stem and gas cylinder neck for breathing apparatus; sizes, threads

DIN 477-9 (Draft standard) : Gas cylinder valves, for highest grade gases; sizes, connections, threads

DIN 1690-10 : Technical delivery conditions for castings of metallic materials; supplementary requirements for steel castings used for heavy-duty valves

DIN 3202-4 : Face-to-face and center-to-face dimensions of valves; Valves with female thread connection

DIN 3202-5 : Face-to-face and center-to-face dimensions of valves; valves for connection with compression couplings

DIN 3230-3 : Technical delivery conditions for valves; Compilation of test methods

DIN 3230-4 : Technical Conditions of Delivery for Valves; Valves for Potable Water Service, Requirements and Testing

DIN 3230-5 : Technical delivery conditions; valves for gas installations and gas pipelines; requirements and testing

DIN 3230-6 : Technical delivery conditions for valves; requirements and methods of test for valves for use with flammable liquids

DIN 3266-1 : Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors, anti-vacuum valves

DIN 3266-2 : Valves for drinking water installations on private premises; PN 10 pipe interrupters, pipe disconnectors, anti-vacuum valves; testing

DIN 3320-1 : Safety valves; safety shut-off valves; definitions, sizing, marking

DIN 3320-3 (Draft standard) : Safety valves; safety shut-off valves; center for face dimensions of flanged safety valves to PN 40 and to DN 250 inlet

DIN 3339 : Valves; body component materials

DIN 3352-1 : Gate Valves; General Information

DIN 3352-2 : Cast iron gate valves, with metallic seat and inside screw stem

DIN 3352-3 : Cast iron gate valves, with metallic seat and outside screw stem

DIN 3352-4 : Cast iron gate valves with elastomeric obturator seatings and inside screw stem

DIN 3352-5 : Steel gate valves, isomorphs series

DIN 3352-13 : Double-socket cast iron gate valves, with elastomeric obturator seat and inside screw stem

DIN 3356-1 : Globe valves; General data

DIN 3356-2 : Globe valves; Cast iron stop valves

DIN 3356-3 : Globe valves; Unalloyed steel stop valves

DIN 3356-4 : Globe valves; High temperature steel stop valves

DIN 3356-5 : Globe valves; Stainless steel stop valves

DIN 3357-1 : Metal ball valves; general requirements and methods of test

DIN 3357-2 : Full bore steel ball valves

DIN 3357-3 : Reduced bore steel ball valves

DIN 3357-4 : Full bore nonferrous metal ball valves

DIN 3357-5 : Reduced bore nonferrous metal ball valves

DIN 3381 : Safety devices for gas supply installations operating at working pressures up to 100 bar; pressure relief governors and safety shut-off devices

DIN 3399 : Gas low-pressure cut-off valves; safety requirements, testing

DIN 3441-1 : Unplasticized polyvinyl chloride (PVC-U) valves; requirements and testing

DIN 3441-2 : Unplasticized polyvinyl chloride (PVC-U) valves; ball valves; dimensions

DIN 3441-3 : Unplasticized polyvinyl chloride (PVC-U) valves; diaphragm valves; dimensions

DIN 3441-4 : Valves of Rigid PVC (Unplasticized or Rigid Polyvinyl Chloride); Y-valves (Inclined-seat Valves), Dimensions

DIN 3441-5 : Unplasticized polyvinyl chloride (PVC-U) valves; PN 6 and PN 10 wafer type butterfly valves; dimensions

DIN 3441-6 : Unplasticized polyvinyl chloride (UPVC) valves; gate valves with inside screw stem; dimensions

DIN 3442-1 : Polypropylene (PP) valves; requirements and testing

DIN 3442-2 : Fittings of PP (Polypropylene); Ball valves, Dimensions

DIN 3442-3 : Polypropylene (PP) valves; diaphragm valves; dimensions

DIN 3475 : Spheroidal graphite cast iron valves and fittings provided with internal corrosion protection by means of enamelling, for use in drinking water supply systems; requirements and testing

DIN 3476 : Corrosion protection of water valves and pipe fittings by epoxy powder or liquid epoxy resin linings – Requirements and testing

DIN 3500 : PN 10 piston type gate valves for use in drinking water supply systems

DIN 3502 : Stopvalves for drinking water supplies on and in private property; straight pattern globe valves with oblique bonnet, rated for nominal pressure PN 10

DIN 3512 : Stopvalves for domestic water supply – Two-way valves – Vertical bonnet type PN 10; Straight pattern globe valve; Technical rule of the DVGW

DIN 3535-1 : Sealants for gas supplies; elastomeric gasket materials for gas valves in domestic installations; requirements and tests

DIN 3535-5 : Rubber/cork and rubber/cork synthetic fiber based gasket materials for use with gas valves, gas appliances and gas pipe work

DIN 3535-6 : Gaskets for gas supply – Part 6: Gasket materials based on synthetic fibers, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains

DIN 3537-1 : Gas stop valves rated for pressures up to 4 bar; requirements and acceptance testing

DIN 3543-1 : Metal tapping valves; requirements, testing

DIN 3543-2 : Metallic tapping stop valves; dimensions

DIN 3543-3 : PVC tapping valves for plastic pipes; dimensions

DIN 3543-4 : High density polyethylene (HDPE) tapping valves for HDPE pipes; dimensions

DIN 3544-1 : High-density polyethylene (HDPE) valves; tapping valves; requirements and test

DIN 3852-1 : Ports and stud ends with metric fine pitch thread, for use with compression couplings, valves and screw plugs; Dimensions

DIN 3852-2 : Stud ends and tapped holes with pipe thread, for use with compression couplings, valves and screw plugs; Dimensions

DIN 3852-11 : Stud ends and tapped holes for use with compression couplings, valves and screw plugs – Type E stud end dimensions

DIN 19208 : Flow measurement; mating dimensions and application of shut-off valves for differential pressure transducers and differential pressure piping

DIN 19578-1 : Stop valves for site drainage systems; anti-flooding valves for faucal sewage systems; requirements

DIN 20042 : Water valve, nominal pressure 40 – Dimensions and requirements

DIN EN 28233 : Thermoplastics valves; torques; test method (ISO 8233:1988)

DIN 30677-1 : Corrosion protection of buried valves; coating for normal requirement

DIN 30677-2 : External corrosion protection of buried valves; heavy-duty thermoset plastics coatings

DIN 32509 : Hand-operated shut-off valves for welding, cutting and allied processes – Type of construction, safety requirements, tests

DIN 42560 : Transformers; Throttle-valves NW 80, Dimensions, Tightness Testing

DIN 74279 : Air braking systems – Charging valves

DIN 86251 : Shut off valves for shipboard use, of cast iron, with flanges, DN 15 to 500

DIN 86252 : Non return valves for shipboard use, cut off type, of cast iron, with flanges, DN 15 to 500

DIN 86260 : Shut off valves for shipboard use, of gun metal, with flanges, DN 15 to 500

DIN 86261 : Non return valves for shipboard use, cut off type, of gun metal, with flanges, DN 15 to 500

DIN 86501 : Valves, screwed bonnet type of gun metal with 24�-connection with port end W according to DIN 3861

DIN 86528 : Tab washers for screwed bonnet valves

DIN 86552 : Valves, screwed bonnet type of steel with 24�-connection with port end W according to DIN 3861

DIN 86720 : Gate valves flat sided of gun metal with screwed bonnet and flanges, DN 20 to DN 100, PN 16

DIN 87101 : Non-return flaps (storm valves), self-closing, vertical type, DN 50 up to DN 150, PN 1 – Mating dimensions for flanges according to PN 10

DIN 87901 : Sniffle valves for pumps

DIN EN 488 : District heating pipes – Preinsulated bonded pipe systems for directly buried hot water networks – Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene; German version EN 488:2003

DIN EN 558-1 : Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems – PN designated valves

DIN EN 558-2 : Face-to-face and center-to-face dimensions of metal industrial valves for use in flanged pipe systems – Class-designated valves

DIN EN 736-1 : Valves – Terminology – Types of valves

DIN EN 736-2 : Valves – Terminology – Part 2: Definition of components of valves

DIN EN 736-3 : Valves – Terminology – Part 3: Definition of terms (includes Amendment A1:2001); English version of DIN EN 736-3:1999 + A1:2001

DIN EN 917 : Plastics piping systems – Thermoplastics valves – Test methods for resistance to internal pressure and leak-tightness

DIN EN 1092-1 : Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories – Part 1: Steel flanges, PN designated

DIN EN 1092-2 : Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 2: Cast iron flanges

DIN EN 1092-4 : Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 4: Aluminium alloy flanges

DIN EN 1680 : Plastics piping systems – Valves for polyethylene (PE) piping systems – Test method for leaktightness under and after bending applied to the operating mechanism

DIN EN 1705 : Plastics piping systems – Thermoplastics valves – Test method for the integrity of a valve after an external blow; German version EN 1705:1996

DIN EN 28233 : Thermoplastics valves; torques; test method (ISO 8233:1988)