BS Vana Standartları

BS EN 287-1:1992/A1:1997 : Welder qualification-welding part 1 steel

BS EN 288-1:1992/A1:1997 : Qualification of Welding Procedures for Metallic Materials Part 1 General Rules for Fusion Welding

BS EN 288-2:1992/2A1:1997 : Welding Procedure Qualification for Metallic Materials Part 2 Arc Welding Procedure Test

BS EN 288-3:1992/A1:1997 : Qualification of Welding Procedures for Metallic Materials Part 3 Arc Welding Procedure Test for Steel

BS EN 331-1998 : Manually operated ball valves and bottom taper plug valves for building gas supply equipment

BS EN 736-3:1999 : Valve-Terminology Chapter 3 Definition of Terms

BS EN 816-1997 : Bathroom faucet cock device, automatic shut-off valve PN10

BS EN 1074-3-2000 : Water supply valves. Purpose requirements and the rationality of appropriate acceptance tests. Check valves

BS EN 1074-5-2001 : Water supply valves. Tests for suitability and special requirements. Control valves

BS EN 1092-1:2002 : Steel flange

BS EN 1171:2002 : Industrial valves—cast iron gate valves

BS EN 1267:1999 : Valves—use water as the test medium to test the flow resistance of the valve

BS EN 1333：1997 : Definition and selection of PN for pipeline components

BS EN 1349:2000 : Industrial process control valve

BS EN 1489-2000 : Building valves. Pressure safety valves. Tests and requirements

BS EN 1491-2000 : Building valves. Expansion valves. Tests and requirements

BS EN 1503-1:2000 : Valves—materials of valve body, bonnet and cover plate Part 1 Steel grades specified in European standards

BS EN 1503-2:2000 : Valves—materials of valve body, bonnet and cover plate Part 2 Steel grades not specified in European standards

BS EN 1503-3:2000 : Valves—materials of valve body, bonnet and cover plate Part 3 Cast iron specified in European standards

BS EN 1515-1:2000 : Flange and its connecting parts—bolts Part 1 Selection of bolts

BS EN 1567-2000 : Building valves-pressure reducing valves and combination pressure reducing valves-requirements and tests

BS EN 1704-1997 : Plastic piping systems. Thermoplastic valves. Test methods for valve integrity after temperature cycling under bending conditions

BS EN 1984：2000 : Industrial valve-steel gate valve

BS EN 12050-4-2001 : Wastewater lifting equipment for buildings and construction sites. Principles of manufacturing and testing. Non-return valves for waste water containing feces and feces

BS EN 12266-1-2003 : Industrial Valves-Valve Test Part 1: Pressure Test, Test Procedure and Acceptance Standard-Mandatory Requirements

BS EN 12266-2-2002 : Industrial Valves-Valve Test Part 2: Tests, Test Procedures and Acceptance Standards – Supplementary Requirements

BS EN 12288-2003 : Industrial Valve-Copper Alloy Gate Valve

BS EN 12334：2001 : Industrial valves—cast iron check valves

BS EN 12351：1999 : Industrial valves—protective covers for flange-end valves

BS EN 12516-3-2002 : Valve-Shell Design Strength Part 3: Experimental Method

BS EN 12560-1:2001 : Flange and its connecting parts-gaskets for flanges (English)

BS EN 12560-2:2001 : Part 1 Non-metallic flat gaskets with or without fillers Flange and its connecting parts—gasket for flange (imperial system)

BS EN 12560-3:2001 : Part 2 Spiral Wound Gaskets for Steel Flanges

Flange and its connecting parts—gasket for flange (imperial system)

BS EN 12560-4:2001 : Chapter 3 Non-metallic polytetrafluoroethylene (PTFE) coated gaskets

Flange and its connecting parts-gaskets for flanges (English)

BS EN 12560-5:2001 : Chapter 4 Corrugated, flat or toothed metal gaskets with or without fillers for steel flanges

Flanges and their connecting parts—gaskets for flanges (English)

BS EN 12569:1999 : Chapter 5 Metal Ring Connection Gaskets for Steel Flanges

Industrial valves—requirements and tests for valves used in the chemical and petrochemical processing industries

BS EN 12570:2000 : Industrial valves-determine the size and method of operating elements

BS EN 12627:1999 : Industrial valves—butt welded ends of steel valves

BS EN 12760:1999 : Valve-socket welding end of steel valve

BS EN 12982:2000 : Industrial valves—The (end-to-end and center-to-end) structure length of butt-welded end valves

BS EN 13397:2002 : Industrial valves—diaphragm valves made of metal materials

BS EN 13648-1-2002 : Condensation container. Anti-overpressure protection facility. Safety valve for condensing equipment

BS EN 13709-2003 : Industrial Valves-Steel Globe Valves and Globe Check Valves

BS EN 13789-2003 : Industrial Valve-Cast Iron Ball Valve

BS EN 13828-2003 : Building valves. Manual copper alloy and stainless steel ball valves for drinking water supply in buildings. Tests and requirements

BS EN 13953-2003 : Movable pressure relief valve that can fill gas cylinders for liquefied petroleum gas (LPG)

BS EN 28233-1992 : Torque test method for thermoplastic valves

BS EN 28659-1992 : Thermoplastic valves-fatigue strength-test methods

BS EN 60534-2-1-1999 : Industrial process control valve. Flow capacity. Liquid flow scale equation under installation conditions

BS EN 60534-2-3-1998 : Industrial process control valves. Flow rates. Test procedures

BS EN 60534-2-5-2003 : Industrial process control valves. Flow capacity. Calibration formula for fluid flow through multi-stage control valves with inter-stage recovery function

BS EN 60534-3-1-2000 : Industrial process control valves. Dimensions. Face-to-face dimensions of two-way, ball, and vertical control valves with flanges and two-way, ball, and angle control valves with flanges

BS EN 60534-3-2-2001 : Industrial process control valves. Dimensions. End face distance of rotary control valves other than butterfly valves

BS EN 60534-3-3-1998 : Industrial process control valves. Dimensions. Butt welding, two-way, spherical, vertical mode control valve end-to-end size

BS EN 60534-6-1-1998 : Industrial process control valves. Installation components for connecting control valve regulators. Installation of regulators on linear actuators

BS EN 60534-6-2-2001 : Industrial process control valves. Installation instructions for positioners installed on control valves. Positioners installed on rotary transmission devices

BS EN 60534-8-1-2001 : Industrial process control valves. Noise problems. Laboratory measurement of dynamic noise through control valves

BS EN 60534-8-3-2000 : Industrial process control valves. Noise problems. Aerodynamic noise forecasting methods for control valves

BS EN 60534-8-4-1994 : Industrial process control valves. Part 8: Noise problems. Section 4. Prediction of noise generated by flow

BS EN  ISO 5211：2001 : Industrial valves—part-turn actuator accessories

BS EN ISO 10432-2000 : Petroleum and natural gas industry. Downhole equipment. Underground safety valve equipment

BS EN ISO 14723:2002 : Petroleum and natural gas industry-pipeline transmission system-subsea pipeline valve

BS  EN ISO 15761-2003 : Steel gate valves, ball valves and check valves in sizes DN 100 and smaller for the oil and gas industry

BS ISO 4401-1996 : Hydraulic transmission. Four-port directional control valve. Assembly surface

BS ISO 5599-1-2001 : Pneumatic and hydraulic. Five-way directional control valve. Mounting interface surface without electrical connector

BS ISO 5599-2-2001 : Pneumatic hydraulic. Five-way directional control valve. Optional electrical connector installation interface surface

BS  ISO 5781-2000 : Hydraulic transmission. Pressure reducing valve, sequence valve, unloading valve, throttle valve and check valve. Mounting surface

BS ISO 6263-1997 : Hydraulic transmission. Compensating flow control valve. Assembly surface

BS ISO 6264-1998 : Hydraulic transmission. Pressure reducing valve. Assembly surface

BS ISO 7790-1998 : Hydraulic transmission. Standard design stack valve with four ports and four port directional control valve with specifications of 03 and 05. Tightening dimensions

BS ISO 10770-1-1998 : Hydraulic transmission. Electric mode hydraulic control valves. Part 1: Test methods for four-way flow control valves

BS ISO 10770-2-1998 : Hydraulic transmission. Electric mode hydraulic control valves. Part 2: Test methods for three-way flow control valves

BS ISO 11727-1999 : Pneumatic fluid mechanics. Control valves and other components of control mechanisms and valve identification

BS ISO 12238-2001 : Pneumatic and hydraulic. Direction control valve. Measurement of conversion time

BS ISO 15218-2003 : Pneumatic hydraulic transmission. 3/2 solenoid valve. Installation interface surface

BS ISO 15407-1-2000 : 18mm and 26mm five-port pneumatic directional control valve. Installation interface without electric plug

BS ISO 15407-2-2003 : Pneumatic transmission. Five-port directional control valve, specifications 18mm and 26mm. Installation interface with optional electrical connectors

BS 970T4-1970 : Valve steel

BS 1010-2-1973 : Specification for discharge cock and shut-off (spinning) valve for water supply and drainage facilities. Part 2: Discharge cock and shut-off valve for ground use

BS 1123-1976 : Safety valves, instruments and other safety accessories for gas storage tanks and air pressure equipment

BS 1123-1-1987 : Safety valves, meters and fusible plugs for compressed air or inert gas installations. Part 1: Installation instructions

BS 1212-1979 : Fixed ball valve (Portsmouth type)

BS  1414-1975 : Specification for steel wedge gate valve (with flange and butt welding end) for petroleum, petrochemical and similar industries

BS 1415-1975 : The first part of the batching valve Non-constant temperature and no compensation batching valve

BS 1552-1995 : Specification for manual shut-off valves for type 1, type 2 and type 3 gas

BS 1570 : Flange and butt-welded steel plug valves for the petroleum industry (excluding wellhead valves and self-blow valves)

BS 1655-1980 : Structural length of automatic regulating valve with flange connection for petroleum industry

BS 1735 : Petroleum industry Use 125-pound class 1.5″-24″ flange connection rising rod wedge cast iron gate valve

BS 1868 : Petroleum, petrochemical and related industries with flanges and butt-welded connection steel check valves

BS 1873-1975 : Petroleum, petrochemical and related industries with flanges and butt welding connection steel globe valves and check valves

BS 1952 : General purpose copper alloy gate valve

BS 1953 : Commonly used copper alloy check valve

BS 1968 : Copper alloy float ball valve

BS 2060 : Generally use threaded connection copper alloy globe valve

BS 2080-1974 : Structural length of flanges and butt-welded connection valves for petroleum, petrochemical and related industries

BS 2591 PT.1 : Terminology for valves and valve parts Part 1: Globe valves, check valves and gate valves with internal threaded connections

BS 2591 PT.2 : Terminology of Valves and Valve Parts Part 2: Safety Valves and Safety Valves

BS 2591PT.3 : Terminology for valves and valve parts Part 3: Plug valves

BS 2591PT.4 : Terminology of Valves and Valve Parts Part 4: Butterfly Valves

BS 2591PT.5 : Terminology of Valves and Valve Parts Part 5: Ball Valves

BS 2995 : Cast steel and forged steel gate valves, globe valves, check valves and plug valves with threaded and socket welded connections of less than 2″ in the petroleum industry

BS 3457-1973 : Specification for gasket material for faucet and shut-off valve seat

BS 3464 : General purpose cast iron gate valve

BS 3808 : Cast steel and forged steel wedge gate valves with flanges, threaded and socket welded connections less than 2″ for the petroleum industry

BS 3948 : Parallel gate valve made of cast iron for general use

BS 3952 : General purpose cast iron butterfly valve

BS 3961 : Commonly threaded cast iron globe valves and globe check valves

BS 4062T-1982 : Hydraulic control valve test

BS 4090 : Generally used cast iron check valve

BS 4133 : Generally flanged steel parallel gate valve

BS 4151-1967 : Evaluation method of pneumatic valve positioner with input signal of 3 to 15 lb/in (pressure gauge)

BS 4312 : Steel globe valves and globe check valves generally connected by flanges

BS 4460 : Steel ball valve for petroleum industry

BS 5146-1984 : Inspection and testing of steel valves for petroleum, petrochemical and related industries

BS 5150-1974 : Generally used cast iron wedge single gate or double gate valve

BS 5151-1974 : Parallel gate valve made of cast iron for general use

BS 5152-1974 : Generally used cast iron globe valve and globe check valve

BS 5153-1974 : Generally used cast iron check valve

BS 5154-1974 : Generally use copper alloy globe valves, globe check valves, check valves and gate valves

BS 5155-1974 : General purpose cast iron and carbon steel butterfly valves

BS 5156-1985 : Diaphragm valve for general use

BS 5157-1984 : General purpose steel parallel gate valve

BS 5158-1989 : Cast iron plug valve

BS 5159-1974 : Cast iron and carbon steel ball valves for general use

BS 5160-1974 : Generally used flanged steel globe valves, globe check valves and lift check valves

BS 5163-1986 : Technical conditions of gate valve for water supply system

BS 5351-1976 : Steel ball valves for petroleum, petrochemical and related industries

BS 5352-1981 : Wedge steel valves, ball valves and check valves of less than 50mm for petroleum, petrochemical and related industries

BS 5353-1989 : Technical specifications for plug valves

BS 5417-1976 : General industrial valve test

BS 5418-1979 : Symbols for general industrial valves

BS 5433-1980 : Technical specification for underground gate valve for water supply

BS 5793-4-1987 : Industrial process control valves. Part 4: Inspection and routine test specifications

BS 5793-5-1984 : Industrial process control valves. Part 5: Marking specifications

BS 5944-4-1984 : Measurement of air noise generated by hydraulic power systems and components. Part 4: Measurement method of sound power level of flow and pressure control valves

BS 6023-1980 : Vocabulary of technical terms for automatic traps

BS 6283-2-1991 : Safety and control devices used in hot water systems. Pressure range from 1bar to 10bar temperature relief valve specification

BS 6283-4-1991 : Safety and control devices used in hot water systems. Part 4: The maximum supply pressure is 12bar, and the standard size includes DN50 micro tension pressure reducing valve specifications

BS 6364-1984 : Low temperature valve

BS 6494-4-1989 : The mounting surface of hydraulic valves. Part 4: Specification for clamping dimensions of four-hole assembly exhaust valves, modular valve and directional control valves of 03 and 05 specifications

BS 6683-1985 : Valve installation and use

BS 6755-1986 : Part 1: Valve test Product pressure test requirements

BS 6755-1987 : Part 2: Valve test and fire resistance test requirements

BS 6759-1-1984 : Safety valves. Part 1: Specification for safety valves for steam and hot water

BS 6759-2-1984 : Safety valves. Part 2: Specification for safety valves for inert gas or compressed air

BS 6759-3-1984 : Safety valves. Part 3: Specification for safety valves for working fluids

BS 7438-1991 : Specification for spring-loaded steel and copper alloy single-disc compression check valves

BS 7461-1991 : Specification for electric automatic gas shut-off valve with flow regulator, closed circuit switch indication, closed position indicator switch or gas flow control

BS/MA 65-76Pt.10 : Butterfly valve

BS/MA 65-76Pt.11 : Diaphragm valve

prEN 593-2003 : Industrial Valve Metal Butterfly Valve

prEN 13327-1998 : Industrial valves Thermoplastic check valves

prEN 13959-2000 : Anti-pollution control valve with nominal pressure from DN6 to DN250 (including DN250) 　 E Group A, B, C and D type

prEN 14071-2000 : Pressure reducing valve for liquefied petroleum gas (LPG) tanks and auxiliary equipment

prEN 45512-1994 : Purchasing Guide Piping systems and valves Boiler and high-pressure pipeline valves including safety valves

prEN 60534-4-1998 : Industrial Process Control Valve “Part 4: Inspection and Routine Test” Draft

prEN ISO 4126-1-2003 : Safety device to prevent overpressure protection Part 1: Safety valve

prEN ISO 4126-4-2003 : Safety equipment to protect extra pressure” Part 4: Pilot operating safety valve

PrEN ISO 10434-2002 : Bolt cap steel gate valve for oil and gas industry

prEN ISO 16135-2001 : Industrial valve 　 Thermoplastic material ball valve

prEN ISO 16136-2001 : Industrial valve 　 Thermoplastic material butterfly valve

prEN ISO 16138-2001 : Industrial valve 　 Thermoplastic diaphragm valve

PrEN ISO 16139-2000 : Industrial valve 　 gate valve made of thermoplastic material

prEN ISO 17292-2002 : Metal ball valves for petroleum, petrochemical and related industries

prEN ISO 21787-2001 : Industrial Valve 　 Thermoplastic Ball Valve

EN 19-2002 : Industrial Valve-Metal Valve Sign

EN161-2001 : Automatic shut-off valve for gas burners and gas appliances

EN 1349-2000+AC-2001 : Industrial Process Control Valve

EN 12094-13-2001+AC-2002 : Fixed fire-fighting system “Parts of gas fire extinguishing system” Part 13: Requirements and test methods for non-return valves and non-return valves

EN 12288-2003 : Industrial valves Copper alloy gate valves

EN 12334-2001 : Industrial valve 　 cast iron check valve

EN 13709-2002 : Industrial valves Steel ball and ball check valves

EN 13789-2002 : Industrial Valve Cast Iron Globe Valve

EN 26553-1991 : Automatic steam trap logo

EN 26554-1991 : Flange connection automatic steam trap structure length

EN 26704-1991 : Automatic steam trap classification

EN 26948-1991 : Automatic steam trap product test and performance test

EN 27841-1991 : Measurement of air leakage of automatic steam trap valve

EN 27842-1991 : Automatic steam trap valve drainage measurement

EN 60534-1-1993 : Industrial Process Control Valve “Part 1” Control Valve Terminology and General Considerations

EN 60534-3-2-2001 : Industrial Process Control Valves” Part 3: Dimensions” Section 2: Flangeless control valves (except thin butterfly valves) end face spacing dimensions

EN 60534-8-2-1993 : Industrial Process Control Valves “Part 8″ Noise Considerations” Section 2 Laboratory Measurements of Noise Generated by Fluid Passing Control Valves